When using equipment for dry powder mortar production line and grout production, five aspects of work should be done well

Dry powder mortar production line equipment, ceramic tile grout production and manufacturing equipment, like other mechanical equipment, must pay more attention to some key points and difficulties throughout the entire process of operation to ensure the smooth operation of the equipment. However, this type of work is often overlooked by many customers. Today, let me inform you of five key points to pay attention to:

When the mixer is in normal operation, the actual operator should regularly check and maintain the equipment. If any abnormal actual operation or deviation of the operating equipment is found, the operator must immediately cut off the power and carry out multi-faceted inspection and maintenance. Only after the inspection is completed can appropriate application and operation be carried out.

2. The mixing level of equipment in the dry powder mortar production line is divided into:

2-1 idealized mixing;

Any mixture of 2-2;

2-3 are not thoroughly mixed.

When encountering an emergency situation where the power is suddenly turned off, the materials in the mixer should be released first, followed by cleaning;

4. The mixing level of materials in the production equipment of ceramic tile grout in the dry powder mortar production line depends on factors such as the proportion of materials to be mixed, physical conditions and characteristics, as well as the types of commonly used mixing machinery and the continuous time of actual mixing operations;

If the flowability of the mixer is very poor and there are particles or solid powders that adhere to each other, it is necessary to commonly use mixing machinery with mechanical equipment in rolling, pressing, rolling and other positions